Pacific Assault Ladders Open Monday

Teamwarfare.com is excited to announce the opening of the Medal of Honor: Pacific Assault ladders. On Monday, January 24th, two brand new ladders will open for competition. Input your MoH: PA GUIDs and start competing today!


The 2 Pacific Assault Ladders that are opening are:

Team Death Match-
A Classic MoH style of play complete with health drops. The class system has been done away with and close spawns will insure that every match will be an insane gratuitous bloodbath. Lean while moving will be enabled and you can find the ruleset here.

Invader-
Play PA the way PA was intended to be played. Health drops will be disabled and the class system will insure a focus on teamwork. Invader will be an intense Objective style and will prove to be more challenging than anything previously seen in Medal of Honor's online competition. Lean while moving will be enabled and you can find the ruleset here.

In addition, the Power Ladder is currently open and ready for matches:

Power Ladder-
Want to play 2 matches tonight? This Scrimmage ladder will enable you to do just that. Challenge and schedule as many TDM or INV matches as you wish. Want lean on? Want lean off? Want a fast run speed? Shoot from the hip and change default match settings if both clans mutually agree in match communication. This is the ladder with the most leniencies and geared towards having as much fun a possible. Join up, matches are being played while you read this! Power Ladder rules & guidelines can be found here.

It is critical that all clans have their server running the Official Teamwarfare Config for Pacific Assault. That config can be found in the Download section, located here. Scroll down to Medal of Honor, click View Downloads, then select the file entitled twlpa.zip.

Teamwarfare.com intends to invite all clan founders that are signed up on PA ladders to participate in some upcoming Founder’s Votes. These votes are critical and will determine the number of landmines to be used in matches as well as gauge the level of interest in a potential MoH: PA Realism Ladder. Every founder that wishes to voice an opinion will be free to do so.

All of your questions and comments are welcome at Teamwarfare's Pacific Assault Forum.


See you in the servers,

T. Wrecks
Assistant News Staff Manager
Teamwarfare.com

Post edited by T. Wrecks at 1/24/2005 10:33:43 PM

Awesome, looks like our pushing it to open finally pays through!

Cant wait
_______________________________________

http://www.outcastclan.com
http://profiles.myspace.com/users/10316745

HMMMMMM.....Must have been those ELF guys helping out with the rules and all the hard stuff. Great job Merv you deserve all the credit for getting these ladders done up and running. Also the The Art of Warfare clan put forth a huge effort to get this thing up and running.

ELF_GOA_GACAPO

Thanks, we were glad to help with these and get this ladder going. Nice work everyone.

Airborne
[TAW] The Art of Warfare
Mapper/Modder
http://www.papub.com

Cool.

Ladders will open at 11pm EST
rules are up I'll ge the links below until we can get them linked in the pulldown above.

also configs are in the operations pulldown under downloads/files for MOH.
Configs.
http://www.teamwarfare.com/files/?game=16

Rules for INVader.
http://www.teamwarfare.com/rules.asp?set=MoH%3A+Pacific+Assault+Invader

Rules for TDM
http://www.teamwarfare.com/rules.asp?set=MoH%3A+Pacific+Assault+Team+Deathmatch


Want to thank Kampfer and Merv for helping with the rules and Configs and getting it all together.
Post edited by Tripped at 1/24/2005 10:22:14 PM

[D12C]Tripped
TeamWarfare MOH Competition Manager

woohoo! let the invasion begin.

www.3vilclan.com
MOH:BT 66.165.90.52

Ok I am one of the server Admins for our clan, and we have downloaded your configs, installed them in the correct directories, and rebooted our server. When trying to connect to the server after the reboot we were unable to connect. It says server not responding. Can you please explain or fix your server configs. I have custom made most of our server configs and yours look nothing like what they should. Please respond ASAP as we would like to move in the ladder but are unable to with current config files.

i'll check it out and get back to you asap
[D12C]Tripped
TeamWarfare MOH Competition Manager

For the following shortcuts, be sure and use your MoHPA install path.

The shortcut command line for the server should be:
"C\Program Files\EA GAMES\MOHPA\mohpa_server.exe" +set dedicated 1 +exec server.cfg

Add this to your shortcut for your game to enable the console:
"C\Program Files\EA GAMES\MOHPA\mohpa.exe" +set cl_playintro 0 +set set ui_console 1

To open the console before joining a server, press the RIGHT ALT key and the tidle (~) key at the same time.
To open the console while playing on a server, press the tilde(~) key.

The twlpasetup.cfg file sets the private password to "twlmatch".
Prior to joining the server you must open the console and type: set password "twlmatch"
You can then join the server by opening the console and typing: connect 24.253.130.86
Be sure to substitute the correct IP Address.

I have tested these configs, and have made available a test server running the tdm settings.
The IP for the test server is: 24.253.130.86
I will leave it running from now through tomorrow night at 7pm. It's not capable of handling alot of players, but adequate enough to test the configs and connecting. You will need to connect by IP as the server is not published.

Originally posted by: [OBC]Malaci
I have custom made most of our server configs and yours look nothing like what they should.

Config files are nothing more than a list of rcon commands.


Post edited by =3VIL=Kampfer at 1/28/2005 5:58:11 PM


www.3vilclan.com
MOH:BT 66.165.90.52

ok I have checked our server setup, and we are using the configs exactly as I downloaded them, with the exception that I changed the server.cfg to exec twlpainv.cfg instead of twlpatdm.cfg. I have checked the server files and we rent a box from trinity, and the server is not a dedicated server but a stand alone server. We have two servers on this box, and both run fine with our original server configs that we have made but will not run with the configs we downloaded from your site. I have connected to your test server and see that it is setup as a TDM server, but we need to run INV. as that is the ladder we are in. If you could please get back to me with more info that would be appreciated as we would like to make a challenge but need our server running correctly before we can do that. Thank you.

I switched it over to Invader, so try the test server now.

I'm not sure what you mean by stand alone server and not dedicated. A MoH server is either dedicated or player hosted.

If you are able to connect to the test server, then we need to troubleshoot the server you are running. Are there any mods installed on your server? Look through our configs and compare them to yours, look for any settings that seem unusual. If you like you can email me your configs. Send them to kampfer@teamwarfare.com



Post edited by =3VIL=Kampfer at 1/28/2005 6:39:11 PM

ok here is the shortcut target line Cservers\mohpa1\mohpa_server.exe Cservers\mohpa1\mohpa_server.exe +exec server.cfg +set net_IP "OurIP" +set net_port "ourport"

This is the only thing I can think of that may be wrong. We are running two seperate servers on the same box, with different ips however so the target needs to set the ips accordingly. If you think this may be the problem then please let me know. I will send you the configs that we downloaded and maybe they are different then what you have. But like I said any help at this point would be appreciated as I am getting frustrated.

i'm assuming you have the path in the post twice by accident and not the actual shortcut, otherwise that could be a problem.

there is no need to set the net_ip, as that will always be the same and picked u by the game,just set the net_port.

try running just one server, without the set net_ip and net_port. see if that works.

if that works, use the set net_port in the twlpasetup.cfg to set your port correctly, and try again.

no need to get frustrated. we'll figure it out.


Post edited by =3VIL=Kampfer at 1/28/2005 7:30:13 PM

ok I can't really just run one server as we have one modded server that stays full at 32 man, and second we are trying to use for twl. They are both on the same box, but use different IPs one is .200, other is .201 so they need to have the assigned IPs in the target line. I would be slapped around if I tried taking down our first server as it is highly used. But we will work with trinity and try to get this fixed asap. Thanks for your help, hopefully we'll be fixed up soon, and I'll let ya know what the issue was once we get it resolved. Once again thanks for your time and help.
Post edited by [OBC]Malaci at 1/28/2005 7:55:28 PM

Please do let us know when and how you get it fixed.

Glad to help, that's what we're here for.

Ok we have had Trinity setup the target as you have listed, and still no go on the server running off the twl configs. Is there anyway that you could email me your config files you are using (minus rcon password) so we can give those a try. We have been trying everything to fix this issue but to no avail. You can reach me at admin@oldbastardsclan.co.uk
Thanks

The ones I used, I downloaded from here.
http://www.teamwarfare.com/files/dl/MoH/twlpa.zip

Didn't change anything, not even the rcon password.

Redowloaded the configs and for whatever reason the server came back up. However we do have to use the entire ip including the port# to connect. But thanks for the help. We'll be putting a challenge in soon now hopefully.
Post edited by [OBC]Malaci at 1/29/2005 3:59:11 AM